BBK Performance 5.0 Coyote Swap Headers for 79-04 Ford Mustang
FEATURES:
- Put a Coyote 5.0 in Your Foxbody / SN95 / New Edge Mustang
- 20+ Horsepower Increase Over Factory Header
- Large 1-3/4" Primaries
- 3/8" Thick Flanges and 16 Gauge Steel Tubing
- Gaskets and Hardware Included
- Fits with Manual Transmission and Most Aftermarket K-Members
- Great Clearance to Ground, Starter, and steering shaft - perfect for super low cars!
- Chrome (1634) Or Silver Ceramic (16340) Finish available
VEHICLE FITMENT:
- 1979-2004 Mustang Chassis with 2011+ 5.0L Coyote Engine Swap
- Will NOT Fit Automatics - Designed to work on Manual Transmissions ONLY
Designed using a Maximum Motorsports K-member and manual transmission. May not fit other configurations without modification.
Require the use of Front O2 wire harness extensions - these are not included and are recommended for installation. Please check the GEN Coyote engine that you have and order the correct harness:
- GEN1 Coyote 11-14 requires Part #1112
- GEN2 Coyote 15-17 requires Part #1119
- GEN3 Coyote 18-23 requires Part #1121
Put a Coyote 5.0 in Your Mustang!
These BBK Coyote swap headers are constructed from mandrel bent high flow 1-3/4" tubing with 3" collectors making them perfect for both naturally aspirated and supercharged builds. These full length headers will help give your Coyote powered Mustang a throaty exhaust note. The titanium ceramic coated finish is very durable and helps hold in heat, improving flow and reducing under hood temperatures.
Installation
-These Headers were designed using a Maximum Motorsports K member and manual transmission. May not clear with other combinations.
-In our experience, it is easiest to install the headers onto the engine assembly prior to installing it into the car. We were able to use all the OEM manifold studs except for 2 on the passenger side. This kit includes x12 M10x1.25 and x12 M10x1.5 bolts to enable install onto any year Coyote engine. Starter and steering shaft clearance is really good with these headers, and clearance to chassis is good as well. Collectors sit about level with the bottom of a Gen 3 Coyote engine, maybe even higher - perfect for super low cars!
Check out our YouTube channel for our review of these headers!
Please CONTACT US for availability if you are in a rush to receive a set, as we do not stock them at our location and warehouse inventory of these headers is typically low. BBK Part # 1634 - Chrome / 16340 - Silver Ceramic
Warning! THIS PART IS DESIGNED AND INTENDED FOR INSTALLATION IN "ANCIENT" (MODEL YEAR 1974 OR EARLIER), OR "COMPETITION," OR "RACING" VEHICLES. COMPETITION OR RACING VEHICLES MAY BE OPERATED EXCLUSIVELY IN 1) EVENTS ORGANIZED BY RECOGNIZED BODIES WITH AUTHORIZING PERMITS FOR PARTICIPATING DRIVERS. 2) RACING EVENT QUALIFICATION, AND 3) PRACTICE ASSOCIATED WITH EVENTS. INSTALLATION AND OPERATION OF THIS PART IN A NON-ANCIENT STREET DRIVEN VEHICLE, INCLUDING DRIVING COMPETITION OR RACING VEHICLES TO THE RACETRACK, IS LIKELY TO BE CONSIDERED ILLEGAL.