The OEM Ford Mustang steering angle is minimal at best. For drifting, the factory angle can be very frustrating to work with. This service takes your factory steering knuckles to the next level by adding significantly more steering angle while also increasing the steering quickness. All knuckles are media blasted, cut, ground, and fit into a jig before being TIG welded by our experienced fabricators and come painted black. Our modified knuckle geometry is set up to provide a small amount of positive Ackerman (toe out) at lock. Through our experience and testing, we have found that this provides the best combination of steering feel, angle, and grip. 60+ degrees of lock is possible with the correct combination of parts! This service applies to 79-93 4 and 5 lug Foxbody knuckles.
Core Exchange Program:
***We only stock 98-04 knuckle cores. If you require 79-93 or 94-97 knuckles for your application please send us your cores for modification!***
Please ship your cores to:
Detroit Drifting Co
ATTN: "Your name here"
27513 Schoolcraft Rd.
Livonia, MI 48150
Tie Rod Drilling Option:
Using the drop-down menu, you can select to have us drill out the tapered tie rod attachment hole in the knuckle to accommodate aftermarket bump-steer kits that utilize straight through-bolt attachment. 5/8" is the most common sizing used for bump steer kits that do require the knuckles to be drilled, but customers should confirm the hardware requirements of their particular kit before selecting this option. Please contact us for sizing that is not listed. Selecting to have us drill your knuckles is beneficial since we can perform this modification by fixturing the tie rod boss in a mill and drilling them prior to welding. This facilitates robust fixturing to ensure a clean, accurate, round hole to be drilled (compared to drilling by hand after welding).
Shipping lead time is about 3-5 business days.