Plug and Play plumbing solution for your SN95 / New Edge Mustang with Inline / pass-through style ebrake!
All line components are DOT approved and hydraulically crimped, providing the highest quality and reliable operation. Easy install for your inline e-brake setup!
****Please select your hydraulic handbrake master cylinder location and OEM foot-brake master cylinder fitting size from the drop down menu. The 2 options will be either M10 or M12. Measure the thread diameter of the forward most foot-brake master cylinder fitting to determine your selection. Contact us if you are unsure of which style to select.
This line set will connect your inline style hydro master cylinder to the OEM rear brake circuit. It will not require any cutting, flaring, or crimping of hardlines. This will be achieved by plumbing your new hydro master cylinder inline with the rear foot-brake line circuit. To do this, you will simply remove the Forward most hardline/fitting from the foot-brake master cylinder - this corresponds to the rear foot-brake circuit. Install the supplied adapter fittings into the master cylinder port and onto the OEM hardline fitting, then route the supplied stainless steel braided hoses from the hydro master cylinder ports through the interior, to the corresponding foot-brake adapter fittings in the engine bay. You will then bleed the foot-brake system as necessary to complete the installation.
-Line 1: Hydro master cylinder (inlet) to OEM foot brake master cylinder
-Line 2: Hydro master cylinder (outlet) to OEM foot brake hardline
-Fittings: Hydro master cylinder outlet fitting, Hydro master cylinder inlet fitting, OEM brake master cylinder adapter, OEM brake hardline adapter.