NEW from Detroit Drifting Co. - A full hydraulic e-brake kit, custom tailored for you 94-04 SN95 Mustang!
This kit will equip your car with an inline / pass-through style hydro e-brake system for single rear calipers.
Kit includes:
- Low-Pro Modular Handbrake w/ Wilwood GS compact master cylinder
- Line Kit - for inline hydro
- Handbrake Mounting Plate (Straight shift handle option included)
How to order:
- Pick your handle style
- Pick your hydro master cylinder piston size
- Pick your vehicle's OEM foot-brake brake master cylinder outlet port size
Hydro Master Cylinder Sizing Recommendations:
- 5/8" Bore: SN95 / New Edge Mustang V6 / GT or Cobra calipers
- 5/8" Bore: Wilwood 1.98" D154 Calipers
- 3/4" Bore: SN95 / New Edge Ford Mustang w/ Taurus calipers
We recommend Wilwood 1.98" D154 brake calipers for best functionality from inline hydro setups. Purchase through the following links:
**Note: D154 Brakes require use of 94-04 Cobra Rotors
We recommend Hawk HP+ brake pads for inline hydro setups. Purchase through the following links:
****Please select your preferred hydraulic handbrake master cylinder location and OEM foot-brake master cylinder fitting size from the drop down menu. The 2 options will be either M10 or M12. Measure the thread diameter of the forward most foot-brake master cylinder fitting to determine your selection. See the table below for common application info. Contact us if you are unsure of which style to select.
This line set will connect your inline style hydro master cylinder to the OEM rear brake circuit. It will not require any cutting, flaring, or crimping of hardlines. This will be achieved by plumbing your new hydro master cylinder inline with the rear foot-brake line circuit. To do this, you will simply remove the Forward most hardline/fitting from the foot-brake master cylinder in the engine bay - this corresponds to the rear foot-brake circuit. Install the supplied adapter fittings into the master cylinder port and onto the OEM hardline fitting, then route the supplied stainless steel braided hoses from the hydro master cylinder ports through the interior, to the corresponding foot-brake adapter fittings in the engine bay. You will then bleed the foot-brake system as necessary to complete the installation.
| Application Info: |
| 94-95 GT - M12 |
| 94-95 SVT/Cobra - M10 |
| 96-98 GT - M10 |
| 96-98 SVT/Cobra - M12 |
| 94-98 V6 - M12 |
| 99-04 All Models with ABS/Traction Cont - M12 |
| 99-04 All Models without ABS/Traction Cont - M10 |