Upgrade your SN95 or New Edge Mustang's rear brakes using our billet aluminum single caliper brackets!
This listing is for 1 PAIR of caliper brackets. Select options from the drop-down boxes to create your own rear big brake kit!
Detroit Drifting Co.'s single caliper brackets are designed to mount Wilwood's D154 floating brake caliper to the rear of 94-04 SN95 / New Edge Mustang Base or GT model vehicles, or 94-98 Cobra models with solid rear axle. These brackets are designed to replace the entire backing plate/caliper mount, just like our dual caliper brackets would. Our single rear caliper brackets are the best solution for 94-98 Cobra owners looking to upgrade their rear brakes. These brackets are NOT compatible with IRS Cobra models. This is a great upgrade for drift or road-race use!
Key Features:
- Floating caliper mounts - reduces tendancy for pad knock-back for better initial pedal response.
- Balanced brake bias - D154 uses a 1.98" piston area vs. 1.76" for factory Mustang rear calipers vs. 2.2" for factory Taurus calipers, keeping brake bias stock-like with a mild performance improvement.
- Braking power - Increased stopping power due to larger piston area, larger pad surface area, and multiple pad compound options. Larger 296mm 94-04 Cobra rear rotors are used to create more mechanical leverage (Base/GT use 267mm non-vented rotors)
- Heat dissipation - Forged aluminum caliper bodies dissipate heat more effectively than factory cast iron calipers. This kit requires use of 94-04 Mustang Cobra rear rotors, which are vented for additional thermal management.
- Aesthetics - Wilwood calipers look great and are offered in different colors - super nice to balance out the front/rear look if you already have a front big brake kit!
- Weight savings - The D154 caliper and DDC adapter bracket weigh 1.4 lb less than OEM iron caliper and bracket.
- Durability - Dedicated motorsports grade components are more robust, rigid, and easily serviced compared to parts store remanufactured OE style calipers.
Required Components:
To utilize the DDC D154 rear caliper brackets, the following components are required and must be sourced separately to successfully install Wilwood D154 Calipers onto your 94-04 Mustang with solid axle:
- Wilwood D154 brake calipers
- 94-04 Ford Mustang Cobra rear rotors (296mm)
- D154 style brake pads
D154 use M10x1.5 banjo brake line connections - same as OEM Mustang Brakes.
**Wilwood D154 calipers will eliminate functionality of the factory parking brake. Check out our OEM+ Hydro E-brake.
Disclaimer/Terms of use: This product/service is intended for off-road / track use only. Detroit Drifting Company LLC assumes no liability and will be held harmless for any injury, damages, or loss to persons or property resulting from the use of these products. Professional installation required.